Simulation and Experimental Validation of Spacer Fabrics Based on their Structure and Yarn’s Properties

Warp-knitted spacer fabrics are considered, which are plates or shells composed of two knitted plane layers connected by vertical beams. Our aim is to compute the effective stiffness and permeability of such spacer fabrics on the basis of their structure and properties of yarns and the monofil. In order to reduce the computational effort and simplify the computational model, homogenization and dimension reduction techniques are applied. They replace the fabric by an equivalent two-dimensional plate or shell with effective elastic properties. To compute the effective permeability, the fluid simulation is done on the fully resolved micro-structure. The paper demonstrates the algorithm on application examples. We compute the elastic properties of a spacer fabric and its effective permeability for different outer-plane compression stages. Numerical examples were performed by applying the multi-scale simulation tools, developed at Fraunhofer ITWM and by comparing with the corresponding experimental results, based on measurements performed at the TU Dresden. The developed algorithms and simulation tools enable a full virtualisation of the material design adapted to exposure scenarios in various technical application cases, i.e. infiltration processes with polymers in the field of fiber reinforced composites, which enables new discoveries for the designing and manufacturing process of 3D warp-knitted spacer fabrics.     

Large-Area Synthesis of Ferromagnetic Fe5−xGeTe2/Graphene van der Waals Heterostructures with Curie Temperature above Room Temperature

Van der Waals (vdW) heterostructures combining layered ferromagnets and other 2D crystals are promising building blocks for the realization of ultracompact devices with integrated magnetic, electronic, and optical functionalities. Their implementation in various technologies depends strongly on the development of a bottom-up scalable synthesis approach allowing for realizing highly uniform heterostructures with well-defined interfaces between different 2D-layered materials. It is also required that each material component of the heterostructure remains functional, which ideally includes ferromagnetic order above room temperature for 2D ferromagnets. Here, it is demonstrated that the large-area growth of Fe_5−xGeTe₂/graphene heterostructures is achieved by vdW epitaxy of Fe_5−xGeTe₂ on epitaxial graphene. Structural characterization confirms the realization of a continuous vdW heterostructure film with a sharp interface between Fe_5−xGeTe₂ and graphene. Magnetic and transport studies reveal that the ferromagnetic order persists well above 300 K with a perpendicular magnetic anisotropy. In addition, epitaxial graphene on SiC(0001) continues to exhibit a high electronic quality. These results represent an important advance beyond nonscalable flake exfoliation and stacking methods, thus marking a crucial step toward the implementation of ferromagnetic 2D materials in practical applications.     

Modelling,validating, and ranking of secure service compositions

In the world of large‐scale applications, software as a service (SaaS) in general and use of microservices, in particular, is bringing service‐oriented architectures to a new level: Systems in general and systems that interact with human users (eg, sociotechnical systems) in particular are built by composing microservices that are developed independently and operated by different parties. At the same time, SaaS applications are used more and more widely by enterprises as well as public services for providing critical services, including those processing security or privacy of relevant data. Therefore, providing secure and reliable service compositions is increasingly needed to ensure the success of SaaS solutions. Building such service compositions securely is still an unsolved problem. In this paper, we present a framework for modelling, validating, and ranking secure service compositions that integrate both automated services as well as services that interact with humans. As a unique feature, our approach for ranking services integrates validated properties (eg, based on the result of formally analysing the source code of a service implementation) as well as contractual properties that are part of the service level agreement and, thus, not necessarily ensured on a technical level.     

DNA Primer Extension with Cyclopropenylated 7‐Deaza‐2′‐deoxyadenosine and Efficient Bioorthogonal Labeling in Vitro and in Living Cells

A deoxyadenosine triphosphate (dATP) analogue for DNA labeling was synthesized with the 1‐methylcyclopropene (1MCP) group at the 7‐position of 7‐deaza‐2′‐deoxyadenosine and applied for primer extension experiments. The real‐time kinetic data reveals that this 1MCP‐modified dATP analogue is incorporated into DNA much faster than that of the similarly 1MCP‐modified deoxyuridine triphosphate (dUTP) analogue. The postsynthetic fluorescent labeling of these oligonucleotides works efficiently according to PAGE analysis, and can be applied for immobilization of a functional antibody on a surface. Site‐specific labeling at two different positions in DNA was achieved and the bioorthogonality of the postsynthetic fluorescent labeling was demonstrated in living HeLa cells.     

Controlling nonequilibrium phonon populations in single-walled carbon nanotubes

We studied spatially isolated single-walled carbon nanotubes (SWNTs) immobilized in a quasi-planar optical lambda/2-microresonator using confocal microscopy and spectroscopy. The modified photonic mode density within the resonator is used to selectively enhance or inhibit different Raman transitions of SWNTs. Experimental spectra are presented that exhibit single Raman bands only. Calculations of the relative change in the Raman scattering cross sections underline the potential of our microresonator for the optical control of nonequilibrium phonon populations in SWNT.     

Patterns in Performance-Orientated Design: An Approach towards Pattern Recognition,Generation and Instrumentalisation

The question of pattern in architecture generally divides architects into two distinct groups: those with an aesthetic interest in man-made ornament; and those who take a deeper interest in the processes that underlie the formation of pattern in the natural world. An investigation of the performative, though, enables an exploration of pattern that arises out of the interaction of man-made interventions with the natural environment. Michael Hensel , Professor for research by Design at AHO, the Oslo School of Architecture and Design, and Achim Menges of the Emtech (Emergent Technologies and Design programme) at the Architectural Association in London, explore this arena based on their research and educational work at the AA and other international institutions, which focuses on aspects of performance in the built environment. Copyright © 2009 John Wiley & Sons, Ltd.     

Field-deployable, high-resolution, time-of-flight aerosol mass spectrometer

The development of a new high-resolution time-of-flight aerosol mass spectrometer (HR-ToF-AMS) is reported. The high-resolution capabilities of this instrument allow the direct separation of most ions from inorganic and organic species at the same nominal m/z, the quantification of several types of organic fragments (CxHy, CxHyOz, CxHyNp, CxHyOzNp), and the direct identification of organic nitrogen and organosulfur content. This real-time instrument is field-deployable, and its high time resolution (0.5 Hz has been demonstrated) makes it well-suited for studies in which time resolution is critical, such as aircraft studies. The instrument has two ion optical modes: a single-reflection configuration offers higher sensitivity and lower resolving power (up to approximately 2100 at m/z 200), and a two-reflectron configuration yields higher resolving power (up to approximately 4300 at m/z 200) with lower sensitivity. The instrument also allows the determination of the size distributions of all ions. One-minute detection limits for submicrometer aerosol are <0.04 microg m(-3) for all species in the high-sensitivity mode and <0.4 microg m(-3) in the high-resolution mode. Examples of ambient aerosol data are presented from the SOAR-1 study in Riverside, CA, in which the spectra of ambient organic species are dominated by CxHy and CxHyOz fragments, and different organic and inorganic fragments at the same nominal m/z show different size distributions. Data are also presented from the MIRAGE C-130 aircraft study near Mexico City, showing high correlation with independent measurements of surrogate aerosol mass concentration.     

Subsurface Raman imaging with nanoscale resolution

We report on chemically specific, subsurface imaging with high spatial resolution. Using tip-enhanced Raman spectroscopy, we probe carbon nanotubes buried beneath a host dielectric media. We demonstrate our ability to map and resolve specific vibrational modes with 30 nm spatial resolution for dielectric layers with different thicknesses.